Skip to main content
April 28, 2019 
Covered Notebook



Good morning.:
Last night covered a spiral notebook I found at Walmart.
I used the Cricut holographic vinyl to cover the entire plastic front cover of the notebook,
First I cut little slits in the middle of the holes so I could easily take on/off the cover. Next I cut a piece of holographic vinyl slightly larger than the notebook cover, it made it easier to recut the holes and add the slits. The next step was using a image I found on Cricut Design Space. The rest was just applying the vinyl to the front cover. 

Note: if you have a difficult time applying vinyl to a surface, you can use washi tape instead of transfer tape. I purchased wide washi tape to use for this project. 

If you have any questions, please feel free to send me a message. Also,  I posted pix on Cricut Design Space, if you are interested in using the image, you can look up my projects under: Becky Seiler. 

Thanks!

Comments

Unknown said…
Could you please tell me what font this was in cricut? I found your shared file in Cricut but I cannot change words. I'm trying to figure out what font.

thanks.

Lora
July 16, 2023 at 9:23 AM
Lo Michele said…
I would also love to know the name of the font you used for this!
Tell us plz, haha
April 23, 2024 at 2:31 AM
Post a Comment

Popular posts from this blog

February 10, 2012 Valentine's Day Treat Holder (for Teachers/Para/Bus)

Good afternoon everyone! I am wrapping up all Valentine's Day treats/holders for my kiddos today. I made a little Valentine's Day treat holder out of a tag from the Cricut TBBM (Tags, Bags, Boxes, and More) cartridge. I measured the bottom portion of the tag and cut a piece of Kraft cardstock and had sewn that to the tag. After I added the grass (used a Fiskars border punch), lake, grass, lily pad, and frog (all from Create a Critter) I used the We R Memory Keepers Crop-A-Dile Corner Chomper to round off the bottom of the tag. I used a stamp from Stampin' Up from the Flight of the Butterfly stamp set and then attached the dragonfly I cut from the Create a Critter cartridge. The little eyes on the dragonfly are bling from iRock. Hope you like it. Have a great weekend everyone!;0) I am entering this in a challenge, here is the link: http://www.creativetimeforme.com/2012/02/throwback-thursday-challenge-episode.html
6 comments
Read more

November 5, 2011 Rosette Turkey

Good afternoon everyone!!! I made a rosette this morning. I was wanting to make some sort of Thanksgivng decoration for my son's teacher and this is what I came up with. I found the directions for the rosette here: http://mrsbscraftroom.blogspot.com/ Go check out here blog if you haven't been there before. She made a beautiful pumpkin rosette.:0) AND she made a video to show you how to make it.;0) I followed the instructions she had and made the brown rosette. I added an extra rosette on the top, I believe it was 2 1/2 x 12 (2 pieces). What I added: 3 strips of 4 x 12 scored at 1/2 inch intervals. I made a 1/2 rosette. At the bottom (to hold it together) is about a 2x12 strip of the same cardstock glued to the rosette. The cartridge I used was Create a Critter. The cardstock I used was: rosette and turkey (Recollections) and the rest was (old) SU. Let me know if you have any questions. Have a great weekend!!!:0)
5 comments
Read more

October 24, 2019 Page dividers and stickers created in Cricut Design to work with the Franklin Covey Compact Planner

I created monthly page dividers as well as corresponding stickers that work with the Franklin Covey Compact Planner. You can find the pages on Cricut Design Space. The first folder is 2019 FC compact page dividers - January and February. The folder which contains the stickers is 2019 FC compact page dividers LABELS. 
Post a Comment
Read more